- EST. 2017 -
FIRE BARRIER
Nova Construction Products Limited are suppliers of one of the UK's leading manufacturers of passive fire protection products.
Scroll Down
FIRE BARRIER PRODUCTS
C450 Cavity Firestop
C450 Cavity Firestop provides a full fill firestop, installed vertically or horizontally in fire resisting walls and floors. When installed against a masonry internal skin it is suitable for use with curtain walling and profiled cladding systems or within a masonry cavity wall construction. Tested in accordance with BS 476 Part 20:1987, C450 Cavity Firestops provide up to 2 hours fire protection.
Ordering:
Please provide the following information:
-
Size of cavity.
-
Fire rating.
-
Quantity required (in linear metres).
-
Fastight Paint quantity (in litres) based on a coverage of 0.8m² per litre.
-
Specify if you require the product to be foil-faced, shrink-wrapped or plain.
FF102 Open State Cavity Barrier - FF102/25 & FF102/50
FF102/25
FF102/25 Open State Cavity Barrier is a TENMAT rigid high expansion intumescent strip encased in aluminium foil. Dimensions: 4mm x 35mm x 1000mm.
Application:
FF102/25 Open State Cavity Barrier is used to prevent the spread of fire for up to 120 minutes in horizontal and vertical cavities up to 25mm where a continuous air gap needs to be maintained.
FF102/50
FF102/50 Open State Cavity Barrier is a TENMAT rigid high expansion intumescent strip encased in aluminium foil. Dimensions: 6mm x 75mm x 1000mm.
Application:
FF102/50 Open State Cavity Barrier is used to prevent the spread of fire for up to 120 minutes in horizontal and vertical cavities up to 50mm where a continuous air gap needs to be maintained.
RSB2 Open State Cavity Barrier
RSB2 Open State Cavity Barrier is used to prevent the spread of fire for up to 60 minutes between horizontal or vertical cavities in external walls where a continuous air gap needs to be maintained.
Ordering:
When ordering this product you will need the following information:
-
The buildup of the Rainscreen System.
-
The overall cavity size (including the insulation layer type and thickness).
-
The minimum free air gap required for drainage and ventilation (in mm).
-
Fire rating required (in minutes).
-
Quantity required (in linear metres).
-
Horizontal or Vertical Barrier.
C144 Cavity Firestop Strips & Blocks
.jpg)
C144 Cavity Firestop Strips
C144 Cavity Firestop Strips provide firestopping for horizontal and vertical linear joints in masonry and concrete walls and floors. The strips are manufactured pre cut to fit the specific gap size and depth of the joint, depending on the fire rating required. The thickness of the strip is supplied larger than the gap size, for a compression fit.
Ordering:
Please provide the following information:
-
Fire rating.
-
Joint size.
-
Quantity required (in linear metres).
C144 Cavity Firestop Blocks
C144 Cavity Firestop Blocks are used to firestop profiles in roofing, cladding and composite floor decking. The blocks are manufactured to suit the specific trapezoidal shape. The width is determined by the fire rating of the masonry wall. When firestopping steel beams or plasterboard partitions the block must fill the full width of the beam or partition.
Ordering:
Please provide the following information:
-
Fire rating.
-
Profile sheet reference or exact profile dimensions.
-
Large or small profile to be filled.
-
Individual blocks or linear metre run of corrugations.
-
Quantity required (individual blocks or linear metres).
-
Fastight Paint quantity (in litres) based on a coverage of 0.8m² per litre.
-
Specify if you require the blocks to be shrink-wrapped.